Guangzhou Junnan Audiovisual Technology Co., Ltd.
Guangzhou Junnan Audiovisual Technology Co., Ltd.
Add to Cart
Smart Electric LCD Elevated Display Lifter conference
Conventional lifter for display, usually equipped with automatic elevation with manual angle adjustment function, can adjust the angle of the display as needed to get the best visual experience. Supporting RS485, RS232 and other communication protocols, it can be remotely controlled through the central control system, which is convenient for centralized management in large meeting rooms and other places.
Our Advantages
JUNNAN LCD lifter exterior dimensions
| Size: | 19/22/24/27 inch LCD display |
| Material: | Aluminum brushed |
| Chassis: | Carbon steel |
| Color: | Silver/Black |
| Panel size: | 550*158mm 600*158mm 600*158mm 710*158mm |
| Chassis Dimensions: | 525*148*650mm 630*148*655mm |
| Net Weight: 22kg: | 22kg 24kg 26kg 26kg |
| Control mode: | Central control, remote control, hand control |
| Weight: ≤8.5kg: | ≤8.5kg |
| Elevation angle: ≤15°: | ≤15° |
| Panel keys: | Up / pause / down / forward / backward tilt |
| Chassis interface: | RS232 input and output/power supply/vga |
Installation steps
(1)Determine the installation position of the desktop first, according to the Monitor lift of the elevator chassis in the desktop to open the corresponding hole
(2) Then countersink the lifter panel accordingly to the size of the lifter panel
(3) Be sure to remove the anti-vibration screws before turning on the power.
(4) Put the lifter inside the open hole, and then connect the power to lift 1-3 times to ensure normal operation. Will be connected to the line on / off HDMI, data transmission, VGA input / output power cord) as follows
(5)installation is complete (Note: the possibility that the Desktop Lifting Display can not move: ① battery socket is not plugged in; ② through the controller is powered, you can press the panel button test)
FAQ
1.Can you send your staff to install the equipment for us?
Re:We can send technicians to install it, but you need to pay the travel and labor costs.
2.Can you can design the equipment according to our size?
Re:No problem, we support OEM
3.How far is your factory from the airport?
Re:About 10KM
4.How many years have your company made this kind of equipment?
Re:We have been producing lifting systems for 13 years
5.Do you provide free spare parts ?
Re:If your order is a bulk order, we will provide 1-2 sets of circuit board accessories for free